Audio-Technica® U853RWU UniLine® Condenser Hanging Microphone
Model #: U853RWUAvailable in Store Only
$99,999.00Save $NaN
For screen reader problems with this website, please call260-724-22762 6 0 7 2 4 2 2 7 6Standard carrier rates apply to texts.
The AT2022 is a condenser microphone designed for stereo recording. Two unidirectional condenser capsules in an X/Y configuration pivot to allow for narrow (90°) or wide (120°) stereo operation. The capsules also fold flat for storage and transportation. Designed for general stereo recording and field sound capture, the AT2022 provides the spatial impact and realism of a live sound field. The microphone comes equipped with a stand clamp, AA battery, fuzzy windscreen and .5 m cable that terminates in a 3.5 mm stereo plug.
ELEMENTS | Fixed-charge back plate, permanently polarized condenser |
POLAR PATTERN | X/Y Stereo |
FREQUENCY RESPONSE | 20–20,000 Hz |
LOW FREQUENCY ROLL-OFF | 150 Hz, 6 dB/octave |
OPEN CIRCUIT SENSITIVITY | -41 dB (8.9 mV) re 1V at 1 Pa |
CHANNEL BALANCE | <2.5 dB |
IMPEDANCE | 200 ohms |
MAXIMUM INPUT SOUND LEVEL | 122 dB SPL, 1 kHz at 1% T.H.D. |
DYNAMIC RANGE (typical) | 103 dB, 1 kHz at Max SPL |
SIGNAL-TO-NOISE RATIO | 75 dB, 1 kHz at 1 Pa |
BATTERY TYPE | 1.5V AA/UM3 |
BATTERY CURRENT / LIFE | 1.2 mA / 500 hours typical (alkaline) |
SWITCH | Off, on/flat, on/roll-off |
WEIGHT | 270 g (9.5 oz) |
DIMENSIONS | 192.0 mm (7.56") long, 65.0 mm (2.56") maximum head diameter, 21.0 mm (0.83") body diameter |
OUTPUT CONNECTOR | Integral 3-pin XLRM-type |
CABLE | 0.5 m (1.6') long, 3 conductor, shielded, vinyl-jacketed stereo cable with 3-pin XLRF-type connector at microphone end and 3.5 mm (1/8") TRS connector at output end |
ACCESSORIES FURNISHED | AT8405a stand clamp for 5/8"-27 threaded stands; fuzzy windscreen; battery; soft protective pouch |
Type Of Microphone | Condenser |
Height (in.) | 7.56 |
Manufacturer Warranty | 1 Year |
Microphone Intended Use | Stereo |
Application | Stereo |
Frequency Response | 20 – 20,000 Hz |
Connection Type | Integral 3-Pin XLRM-Type |
Product Weight | 0.6 |