For screen reader problems with this website, please call260-724-22762 6 0 7 2 4 2 2 7 6Standard carrier rates apply to texts.

Innovative Concepts Audio Video

Innovative Concepts Audio Video

260-724-2276

Rockford Fosgate® Punch Marine 100 Watt Full-Range Mono Amplifier

Model #: PM100X1

$229.99

At a Glance

The PM100X1 is a 100 Watt dynamic power mono amp using DC and AC voltages present on existing radio speaker outputs. This design allows connection to a speaker wire without running a B+ cable. It also presents a safe load to the radio amp circuit to eliminate excessive wear and tear on the radio, making it ideal for OEM and aftermarket radio integration. The conformal coated PCB allows for mobile, motorsport and marine applications. PM100X1K "KIT" ships with 2 pcs.

WarningProposition 65 Warning for California Residents
Rockford Fosgate® Punch Marine 100 Watt Full-Range Mono Amplifier

General Specs

ColorSilver
Depth (in.)3.9
Width (in.)3
Height (in.)1.3
Amplifier Output (Watts)100
Bluetooth CapableNo
Amplifier ChannelsMono Block
Impedance2 - 4 Ohms
Manufacturer Warranty2 Year
RMS Power Handling (Watts)100
Water ResistantYes
Digital InputNo
Shallow MountNo
Speaker Level InputYes
Minimum Impedance Unbridged2 Ohm
CollectionPunch

Rockford Fosgate® Punch Marine 100 Watt Full-Range Mono Amplifier

Model #: PM100X1
87061
Model #: PM100X1
Rockford Fosgate
$229.99

Available in Store Only

$229.99

At a Glance

The PM100X1 is a 100 Watt dynamic power mono amp using DC and AC voltages present on existing radio speaker outputs. This design allows connection to a speaker wire without running a B+ cable. It also presents a safe load to the radio amp circuit to eliminate excessive wear and tear on the radio, making it ideal for OEM and aftermarket radio integration. The conformal coated PCB allows for mobile, motorsport and marine applications. PM100X1K "KIT" ships with 2 pcs.

Get to know this product.

The PM100X1 amplifier uses our patent pending BTL technology to provide you a very unique amplifier solution. This single channel amplifier utilizes the speaker output of the radio to not only provide the audio signal it needs, but also the power that runs the unit. This is done through a combination of the DC offset voltage commonly present and the audio AC signal itself.

Initially, it uses the DC offset voltage for its turn on power as well as primary amplification power. As volume is increased and the output power demand rises, the amplifier begins sharing the power load between the DC and AC signals. Once high volume is reached, the majority of the amplifiers power is provided from the AC signal only and is supplemented by its intenal storage bank.

This design allows it to actually charge its capacitive bank on the downside of the AC signal wave which is essentially unused power anyway. It also presents no more load to the radio than a standard 2 or 4 ohm speaker would thus keeping the radio amplifier circuit safe from low impedance conditions. This design allows the amplifier to be connected to a radio with a rated 20 watt output and produce up to 100 watts dynamically. The unit also features a 2/ 4 ohm input switch to match the amplifier to the output impedance rating of the radio circuit. For speaker protection, we incorporate and selectable high pass crossover with setting at 60, 80 and 100Hz.

In rare cases there is not enough DC voltage present to power the amp at turn on so an add on B+ wire is included and can be tied to other lower current circuits in its proximity. This design makes the amplifier ideal for OEM or aftermarket upgrades without having to use physically larger amplifiers as they can be hidden in the dash or doors of the vehicle. It is also IPX6 rated for those installs where moisture may be present.

Patented BTL Powered "FreeLoad" Technology (US 9,438,181 B1)

Harvests both B+ and Audio Signal From Standard Head Unit Speaker Outputs

Uses Stored Energy from BTL Amplifier to Produce Dynamic Power of Over 100W

Current Limited to Protect Head Unit for Both 4 Ohm and 2 Ohm Configurations

High Level Turn On

Optional B+ Connection for Non-Standard Speaker Outputs

Selectable 4 and 2 Ohm Play

60, 80, and 100 Hz Selectable 12dB/Oct HP Butterworth Crossover

Small Stealth Package that Allows for Anywhere Installation

Pig Tail Connectivity for Easy Installation

Extruded Aluminum Heat Sink

Muted turn on

Thermal Protection

Short Circuit & Over Voltage Protection

Discrete surface mount technology

CEA-2006 Compliant & CE Compliant

2-Year Warranty

Useful Documents
Specifications

General Specs

ColorSilver
Depth (in.)3.9
Width (in.)3
Height (in.)1.3
Amplifier Output (Watts)100
Bluetooth CapableNo
Amplifier ChannelsMono Block
Impedance2 - 4 Ohms
Manufacturer Warranty2 Year
RMS Power Handling (Watts)100
Water ResistantYes
Digital InputNo
Shallow MountNo
Speaker Level InputYes
Minimum Impedance Unbridged2 Ohm
CollectionPunch
WarningProposition 65 Warning for California Residents